Hot Keywords:

Electromagnetic modelling of complex targets in the near zone and comparison with experimental results
A comprehensive performance assessment of a radar system through simulation requires the complete and accurate modelling of the operating environment, the subsystems and their interactions. The electromagnetic (EM) modelling of target reflectivity is a fundamental area of the radar system design since the model selection often drives the system par....
Authors:D'Elia;U.F.;Del Gaudio;M.G.;Pistoia;D.Publisher:Radar 97 (Conf. Publ. No. 449)Conference Date:14-16 Oct. 1997ISSN:0-85296-698-9Total Page:xxxvii+886
A scheduling problem for two competing queues with finite capacity and non-negligible setup times
We consider a setup scheduling problem for a manufacturing system with finite buffers. Some analytical results for the infinite capacity case are also included. The system comprises a non-perfect, reliable single machine processing two part types, modeled by means of a fluid approximation. The objective of the control is to minimize an index cost u....
Authors:Del Gaudio;M.;Martinelli;F.;Valigi;P.Publisher:Decision and Control;2001. Proceedings of the 40th IEEE Conference onConference Date:4-7 Dec. 2001ISSN:0-7803-7061-9Total Page:5 vol. lxxv+5054
TE-CO/sub 2/ Injection Laser: Satus and Perspectives
Authors:Martellucci;S.;Richetta;M.;Bellecci;C.;Gaudio;P.Publisher:Lasers and Electro-Optics Europe;1998. 1998 CLEO/Europe. Conference onConference Date:14-18 September 1998ISSN:0-7803-4233XTotal Page:
TEA CO/sub 2/ Dial Station for Atmospheric Water and Pollutants Measurements
Authors:Bellecci;C.;Gaudio;P.;Valentini;M.;Martelluci;S.Publisher:Lasers and Electro-Optics Europe;1998. 1998 CLEO/Europe. Conference onConference Date:14-18 September 1998ISSN:0-7803-4233XTotal Page:
Distance protection application test using a real time digital transient network analyser
Real-time power system simulator testing has proven to be an invaluable means to evaluate relay performance under realistic conditions. This paper exposes the configuration and the performance of a real time digital transient network analyser (DTNA) in closed loop testing of a distance protection system in a series compensated network. A power syst....
Authors:Nimmersjo;G.;Saha;M.M.;Andersson;L.-G.;Gaudio;J.C.Publisher:Developments in Power System Protection;2001;Seventh International Conference on (IEE)Conference Date:9-12 April 2001ISSN:0-85296-732-2Total Page:xxx+562
The experimental evaluation of the success path monitoring system
The success path monitoring system (SPMS) is an advanced computer-based operator aid which is intended to enhance the operator's ability to handle plant disturbances effectively. It achieves this by providing an online assessment of both the status of critical safety functions and the status of appropriate success paths. A prototype version of SPMS....
Authors:Marshall;E.C.;Baker;S.M.;Reiersen;C.S.;Owre;F.;Gaudio;P.J.;Jr.Publisher:Human Factors and Power Plants;1988.;Conference Record for 1988 IEEE Fourth Conference onConference Date:5-9 June 1988ISSN:Total Page:xii+596
Detection and tracking of ballistic target
Some aspects of detection and tracking of ballistic targets are analysed in this paper. In particular, the RCS model versus aspect angle is obtained for a notional target starting from its CAD model. Subsequently, the kinematic model of the ballistic target is derived; it includes the main forces acting on it, namely, the thrust, the drag and the g....
Authors:Farina;A.;Del Gaudio;M.G.;D'Elia;U.;Immediata;S.;Ortenzi;L.;Timmoneri;L.;Toma;M.R.Publisher:Radar Conference;2004. Proceedings of the IEEEConference Date:26-29 April 2004ISSN:0-7803-8234-XTotal Page:xxvii+627
An electromagnetic micrometer to measure the wire centering in high-resolution aluminium drift tubes
The muon detector of the Atlas experiment at LHC (CERN) consists of 370000 high-resolution drift tubes assembled in multi-layer chambers. To take full advantage of the single-tube resolution, the high-precision external surface of tube end-plugs is used for positioning a layer before gluing. The wire position in the tube is defined at construction ....
Authors:Cambiaghi;M.;Cardini;A.;Casani;S.;Ferrari;R.;Gaudio;G.;Iuvino;G.;Lanza;A.;Prata;M.Publisher:Nuclear Science Symposium;1999. Conference Record. 1999 IEEEConference Date:24-30 Oct. 1999ISSN:0-7803-5696-9Total Page:3 vol. xlix+1713
A study of discharge coefficient in bileaflet valves
The measurement of a cardiac valve's area is a common procedure, usually performed with noninvasive, Doppler-based techniques. Such measurements are not, however, without problems: a potential source of errors is the value of a valve's discharge coefficient. In-vitro pressure and flow measurements relative to the bileaflet valve of four brands were....
Authors:Grigioni;M.;Daniele;C.;D'Avenio;G.;Morbiducci;U.;Del Gaudio;C.;Barbaro;V.Publisher:Engineering in Medicine and Biology Society;2001. Proceedings of the 23rd Annual International Conference of the IEEEConference Date:25-28 Oct. 2001ISSN:0-7803-7211-5Total Page:4 vol. 4132
An electromagnetic micrometer to measure the wire centering in high-resolution aluminium drift tubes
The muon detector of the ATLAS experiment at LHC (CERN) consists of 370000 high-resolution drift tubes assembled in multi-layer chambers. To take full advantage of the single-tube resolution, the high-precision external surface of tube end-plugs is used for positioning a layer before gluing. The wire position in the tube is defined at construction ....
Authors:Cambiaghi;M.;Cardini;A.;Casani;S.;Ferrari;R.;Gaudio;G.;Iuvino;G.;Lanza;A.;Prata;M.Publisher:Nuclear Science;IEEE Transactions onConference Date:24-30 Oct. 1999ISSN:0018-9499Total Page:
合计12个 | 页次:1/2页 1 [2] 下一页